Roll Ball Switch

Tilt Switch are the highly sensitive instruments that are especially designed for the detection of orientation or inclination. These digital equipments turns ON/OFF by tilting to one side and the other due to the motion of the device in which these sensors are installed. They are widely used to check the rising levels of powders and solids and activates an alert when it reaches a pre-set value. Tilt Switch are commonly used in silos, in open pits, for plugged chute detection, over the conveyor belts and many more. Our company offers various different types of such instruments with mechanical and optical control in between the angle 10 to 45 degree.

Vibration Sensor are the highly flexible and sensitive devices that are widely used for the measuring various processes. These are also known as piezoelectric sensor that gives signal by altering the electric charge while there are changes within the acceleration, pressure, temperature and force. They are fabricated by using top grade highly conductive materials that are coated with a protective casing to prevent the influence of magnetic fields. There are various types of such components availed by us such as acceleration type, ball rolling and photoelectric type. These equipments consumes very low voltage and are capable to operate in between -40 to 85 degree Celsius.

Shock Sensor are the instruments that are designed for the detection of the shockwaves that are when a window or a door being broken. These automated equipments activates automatically when a large shock wave is detected and sends an alarm signal the controlling unit about the working situation. These are especially used for the theft detection when an intruder tries to break door or any other entry passage. Shock Sensor availed by us are available in acceleration and centrifugal type. They can be used in outdoor alarm systems and in cars to let the vehicle know when to release the air bags in case of accidents.
Rotation Sensor Switch are the electronic devices that are fabricated by using top quality highly sensitive and reliable components that gives accurate results. These are widely used for the detection of changes in rounds per minute of the rotating equipment such as screw conveyors, bucket elevators or belt conveyors. They are available in various types with vertical and horizontal PCB connections. Rotation Sensor Switch are capable to detect zero speed and reverse detection as per the movement of the rotating elements. These equipments are enclosed in explosion proof and temperature resistant which make them capable to resist severe working conditions.

Back to top
ONCQUE CORPORATION All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.(Terms of Use)
Developed and Managed by Infocom Network Ltd.